Cleanroom Design and Configuration

PortaFab designers can help you design and configure your cleanroom to meet all of your specifications in the most cost effective manner. Below is an example of our FabLine, but most of our modular cleanroom systems have similar components.

Roll over the symbol below on our FabLine cleanroom system to view many of our cleanroom components, which can be utilized for other cleanroom systems.

Furring Wall Systems

Furring Wall Systems
Furring walls allow existing walls or channels to be quickly skinned.

Batten Wall Systems

Batten Wall Systems
Floor to ceiling walls provide fast installation with a flush surface on both sides of the wall.

Electric Sliding Doors

Electric Sliding Doors
Aluminum sliding doors are easily accommodated by interfacing with our wall systems.

Framed Windows

Framed Windows
Single or double flush windows can be glazed from stud to stud for full glass viewing.

Grille Openings

Grille Openings
Return air grilles can be easily installed into our wall panels in the field, or at the factory, reducing field labor costs.

Wall Penetrations

Wall Penetrations
Pass thrus, piping and equipment can penetrate wall panels through simple field modifications.

Doors

Doors
Aluminum rail and stile doors provide an attractive appearance with a variety of hardware options available.

Framed Wall Systems

Framed Wall Systems
Provide flush wall surfaces on cleanroom side with integrated support on the chase side for piping, conduit and related equipment required to service the cleanroom.

Ceiling/Head Track Interface

Ceiling/Head Track Interface
Our gasketed head tracks can interface with standard grids and flush grids providing a virtually seamless transition.

Factory Installed Windows

Factory Installed Windows
Pre-installed windows with mitered corners provide flush glazing with a beveled back allowing for an easy wipe down.

Bulkheading

Bulkheading
Tool fit-ups and equipment bulkheading can be easily integrated into the Framed Wall System for a sealed interface.

Elevated Wall Panel

Elevated Wall Panel
Panels can be elevated for side wall returns. Egg crate and wire mesh can be integrated with the studs to conceal mechanical plenums.